SAE J1772 SAE Electric Vehicle Conductive Charge Coupler

作者:标准资料网 时间:2024-05-11 19:26:47   浏览:8206   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE J1772
Title:SAE Electric Vehicle Conductive Charge Coupler
Issuing Committee:Hybrid - Ev Committee
Scope:This SAE Recommended Practice covers the general physical, electrical, and performance requirements for the electric vehicle conductive charge system and coupler for use in North America. The intent of this document is to define a common electric vehicle conductive charging system architecture including operational requirements and the functional and dimensional requirements for the vehicle inlet and mating connector.
下载地址: 点击此处下载
【英文标准名称】:Fibreopticcommunicationsubsystemtestprocedures-Digitalsystems-Receiversensitivityandoverloadmeasurement
【原文标准名称】:光纤通信子系统试验规程.数字系统.接收器灵敏度和过载测量
【标准号】:BSEN61280-2-1-2010
【标准状态】:现行
【国别】:英国
【发布日期】:2010-06-30
【实施或试行日期】:2010-06-30
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:数字信号;电气工程;光纤;输入功率;振动;数学计算;测量;测量技术;光波导;光学;超荷载;过载试验;工作性能;接收器;灵敏度;灵敏级别;电信;测试
【英文主题词】:Digitalsignals;Electricalengineering;Fibreoptics;Inputpower;Jitter;Mathematicalcalculations;Measurement;Measuringtechniques;Opticalwaveguides;Optics;Overload;Overloadtests;Performanceinservice;Receivers;Sensitivity;Sensitivitylevels;Telecommunications;Testing
【摘要】:ThispartofIEC61280describesthetestproceduresapplicabletodigitalfibreopticcommunicationanddatasystems.Theobjectofthistestprocedureistomeasuretheminimumandmaximumopticalpowersrequiredandallowedattheopticalinputportofafibreopticsystemtoensureitsoperationwithinspecifiedlimits.Anotherobjectiveistoverifythattheguaranteederrorperformanceisobtainedattheminimumandthemaximumopticalinputpowersspecifiedbytheterminalequipmentmanufacturer.
【中国标准分类号】:M33
【国际标准分类号】:33_180_01
【页数】:18P.;A4
【正文语种】:英语


基本信息
标准名称:光学和光学仪器 环境试验方法 第6部分:砂尘
英文名称:Optics and optical instruments—Environmental test methods—Part 6:Dust
中标分类: 仪器、仪表 >> 光学仪器 >> 光学仪器综合
ICS分类: 成像技术 >> 光学设备
替代情况:替代GB/T 12085.6-1989
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2011-01-14
实施日期:2011-05-01
首发日期:1989-12-29
作废日期:
主管部门:全国光学和光子学标准化技术委员会(SAC/TC 103)
提出单位:中国机械工业联合会
归口单位:全国光学和光子学标准化技术委员会(SAC/TC 103)
起草单位:宁波永新光学股份有限公司、上海理工大学
起草人:曾丽珠、章慧贤、冯琼辉、叶慧
出版社:中国标准出版社
出版日期:2011-05-01
页数:8页
书号:155066·1-42811
适用范围

本部分规定了砂尘试验的试验条件、条件试验、试验程序及环境试验标记。
本部分适用于光学仪器、装有光学零部件的仪器和光学零部件。
本试验目的是研究试样的光学、热学、机械学、化学和电学等特性受到砂尘影响的变化程度,特别是研究运输部件(如滑动面、轴承、接触器、控制装置、齿轮)的故障或不能允许的表面磨损。本试验不用来确定对粗粒砂尘的耐磨性。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 仪器 仪表 光学仪器 光学仪器综合 成像技术 光学设备